Plumbing can sound technical for anyone, but it really doesn’t have to. Low water pressure, clogged pipes, or dripping faucets are some of the plumbing problems you can face in your home. You have your plumber on speed dial and you’re always tempted to call whenever you need plumbing services. As a homeowner, you may not have the necessary plumbing skills, and an attempt to repair a leak can lead to loss of property. You can end up causing more damage and destroy property worth thousands of dollars. You can hurt yourself too. But don’t be scared, I have compiled the top ten plumbing tips everyone needs to know. These can save you money as well as the headache that comes as a result of poor plumbing.
Locate the shut-off valves
Identify the exact location of the drain and the shut of valves whenever you are planning to move to a new house. Some are located outside, but in most cases, they are found inside the house.
Secondly, find out where the access points of the sewer line are. This will give you an easy time during cleanouts. However, condos and apartments may not have dedicated shut-off valves.
Ensure your plumbing pipes are intact
Before pounding nails or drilling holes into your floors, ceiling, or walls, determine if there are any drainage pipes or plumbing supplies beneath. You can accidentally puncture the plumbing materials while working. Use a stud finder or endoscopic camera to locate plumbing pipes behind the walls.
Don’t flush every trash down the toilet
As a homeowner ensure you don’t flush every single trash down the toilet. All trash except tissue paper leads to very nasty clogs in the whole drainage system. You end up with a blocked drainage system leading to an overflow on top of manholes.
Don’t clog the drain with garbage
Food debris, vegetable peelings, coffee grounds, or starchy foods like potatoes stuffed in the kitchen drain will definitely clog your plumbing pipes. Sort out wastes before disposal and sieve food remains so that they don’t go down the drain. You can also get acquainted with the manufacturer’s manual on waste disposal and find out what the system can handle.
Use a plunger
A high-quality plunger can easily clear clogs from the drains, sinks, and toilets. Start by pushing water out then remove traps, for instance when cleaning sink traps. It will be much easier for you and less messy.
Use a wet-dry vacuum to dislodge small hard objects
Small hard objects such as toothbrushes or comb can be dislodged using a wet-dry vacuum. It easily sucks out the object, unlike a plunger which will push it further down the drain.
Fix leaks immediately they occur
A leaky faucet can waste up to approximately eight gallons of water each day. Every steady drip means money-draining down into waste. Likewise, a running toilet can waste approximately 200 gallons of water in a day. Promptly fix any small leaks before they get out of hand and become costly.
Don’t make fittings too tight
Too tight fittings lead to stripped screws and broken bolts. This is common in do-it-yourself plumbing. Ensure you don’t make it too tight to remove. Fittings can also get deformed or collapse if the tubings don’t match or if the sizes are inappropriate.
Always have a plumber’s tape
A Teflon tape also known as a plumber’s tape, seals pipe threads and prevents leaks that may occur around fittings and joints. Wrap the plumber’s tape around the pipe threads three times then seal. Always remember is the best fit for household plumbing activities while the yellow one is for gas line fittings.
Check for any leak that may occur
Check for leaks at the end of each plumbing project. You can do this by running water through the drainage, then open and close all drains and valves. Professional plumbers can miss a small leak too and the need to reseal a connection arises.
Related Articles: What Could Be Cause of low water pressure in Your Home